Wednesday, 17 August 2022

#53 WW Diagonal double fold card by Julie Walker

Found a video online by Lisa Curcio of Lisa's Stamp Studio and loved it, hope you will too. looks a bit complicated but trust me it isn't
You will need to start with a piece of base card 8.5 inches by 11 inches (21.6 cm by 28 cm) Score this card at the half way point on both the vertical and horizontal, so 4.25 inches (10.8 cm) on the short side and 5.5 inches (14 cm) on the longer side.
Cut one complete quadrant from the card
The arrows in the picture indicate how to diagaonally cut two further quadrants on your card, so that you end up with a base card that looks like this
Score your folds well so that the card sits nicely. The side panel folds inwards and the top panel folds down . Now its time to decorate. A little more tricky than I at first thought but you just have to remember if your paper is directional to make sure you are cutting your angles correctly. Hope you will have a try at this card, I don't think you will be disappointed. I put mats and layers on my card and it still folds nice and flat into a standard envelope. Have fun and happy crafting everyone.

Tuesday, 9 August 2022

Wednesday Wonder #52 by Tracy Shephard

 Hello everyone.

Welcome to my second card for the 'Wednesday Wonder' challenge and I hope you love it as much as I do. 


I think it is a fabulous fold and so versatile. You can change it in so many different ways.

Of course it has to be a bit of a showstopper!

You will need..

cardstock 5 x 20 inches. I used 160gsm.
acetate   5 x 10 inches
Design paper of your choice
plain or coloured card for mat and layering

For the Rosette

cardstock 1 x 15 inches
small circle
center flower decoration

You will also need a large sentiment.

So let's get started...



1. Score your 5 x 20 cardstock along the long side at 5 and 15 inches, fold and burnish.

2. I used three mats for the inside of my card. Each one cut 1/4 inch smaller than the other.

   Pink layer 9 3/4 x 4 3/4
   White layer 9 1/2 x 4 1/2
   Design paper 9 1/4 x 4 1/4

3. For the folds on each side of your card...
I found using a lighter card, made the folding easier. You need sharp, crisp folds and a neat point.

Each flap is 5 x 5 inches. Find the center of the flap and lightly mark it. 

 

On each side, mark at 2 inches, and 4 1/4 inches. 
Using your scoring tool, starting at the center point, score to each side mark. 


Fold and burnish each scoreline so you get get a lovely crisp edge.

 4. For the mat and layers for the flaps, I used three layers for the triangle..

Pink layer 4 3/4 x 4 3/4

White layer 4 1/2 x 4 1/2 

Design paper 4 1/4 x 4 1/4

I cut each piece as a square, found the center point and cut to each bottom corner. 

5. The pink layers, were a bit more tricky, so take your time... 

You will need 4 of the following shape. 


You can make a template. Using copy paper, make the 5 x 5 flap and fold and cut the piece you need for the layer. This will make it much easier. 

6. Take your 5 x 20 inch acetate and place it on your card with the flaps over it. I used red liner tape to attach the flaps to the acetate. 

7. The Rosette is made by scoring the 1 x 15 inch cardstock and scoring it every 1/4 inch. Concertina fold the scorelines and tape together to make a circle, 

8. Fiddle the Rosette into a neat circle and using hot glue, stick the small cicle to the back. 

Hot glue is brilliant for this purpose, making it quick, easy and less messy. 

Stick a pretty flower to the front of the Rosette, and then , agin using hot glue, place the Rosette to the center points of the front flaps on your card. 

9. Finally, add you sentiment. I used 3D foam pads, which gave it a lift and it stands out beautifully. 



I do hope you will give this a try and I can't wait to see your gorgeous creations.

Happy crafting


Tracy x 

 

 




Wednesday, 3 August 2022

#51 WW Twist and Fold Card by Liz Cavill

Welcome to another Wednesday Wonder and this week it's a Twist and Fold card.

The butterflies are attached just by the body and antennae, leaving the wings loose.  
This is the card closed.....

..... and this shows what it is like when opened.

There are a lot of templates online for starting with a 8" x 8" piece of card, but I couldn't find any for 10" x 10", so I've made the one below.  The finished card when folded will be 5" x 5".   The larger version is less fiddly to fold.

Start with a 10" x 10" piece of card, it's best to use fairly thin card as it will be easier to fold the card flat. 
The blue and red lines are the score lines.  I found it easiest to score the four rectangles in the corners first, then score the four diagonal lines.
Red lines = Mountain folds 
Blue lines = Valley folds

Decorate the sections with mats ¼" smaller than each section.

When folded, the four corners are the parts that will show on the front of the card, so embellishments can be added on the corners. 

I've left the middle of the card blank for the message, but you could decorate this area and write the message on the back.  To close the card, make sure all your mountains and valley folds are well burnished, to enable you to easily twist and fold the card.

For my second card, I added an extra white mat and changed the shape I used of some the mats.  The flowers are attached just by the middle and the petals bent up to add some dimension.


This little video shows how the card opens and closes.  You may need to click on it twice to view.

I hope you try this fold.  Don't forget to share a photo on our CMKH Facebook page and add to the WW album.

Love Liz xx

Sunday, 31 July 2022

AUGUST "ONE SHEET" GROUP CHALLENGE

 Hello again

Throughout August we are holding a group challenge based upon a One Sheet Wonder.  If you are lucky enough to have a CMKH Planner some of the measurements in your grid have been tweaked just a little bit.

The idea of this challenge is to create cards/ or a project of your choice with one sheet of 12"x12" patterned paper.  If you wish to use 6" x 6" paper then just halve the measurements.  This challenge is for you to use in any way you wish.  It is your interpretation of the grid.

If you need ideas to get going then take a look at my YouTube video.  I have used the Cottage Life papers from Graphic 45.  Alternatively, you could try stamping on plain paper.  It really is up to you.



Please remember that these measurements are as accurate as possible however you may need to tweak the squares as you work with the paper.  The main thing is to enjoy what you're doing and to share your challenge projects with the group.  I will set up an album specifically for August.


AUGUST CMKH GROUP CHALLENGE IMPERIAL AND METRIC GRID PDF.pdf


Imperial 





Metric










Happy crafting!
Love Elisabeth xx



CREATIVE MINDS KIND HEARTS FACEBOOK GROUP
https://www.facebook.com/groups/creativemindsiikindhearts/


Wednesday, 27 July 2022

 # 50 CORNER BOX POP UP CARD BY LISA SHAW

Wednesday Wonder Summer of Folds #50

Pop up box cards are my worst nightmare - have never liked making them and usually avoid them like the plague, but this one looked so nice that I pushed myself out of my comfort zone to show you how to make this one.



I have done all measurements in inches, so your starting point is one piece of 12x6” cardstock for your base. The 8x2” and the two small tabs I cut out of 180gsm - anything thicker may be hard to work with. (I used Craft Consortium Wood Textures so that I had a ready made wood effect for the box) Cut and fold as per the diagram.



Glue your chosen background paper layers onto the main card. I also covered the reverse of the two 6x4” sections which will end up being the front and back of your finished card. I cut the layers 1/4” smaller than the card. 



To make up the box section, follow the photos above. The strips inside the box are where you will attach your flowers etc. You should be able to see that the two end tabs are folded in opposite directions - one a valley, the other a mountain fold. I attach one tab to the inside of the box and glue down, then attach the other side, making sure that when folded flat/squashed sideways, the box lays flat. 
This is the part I always struggle with, so if you have low tack adhesive you might want to check the box folds flat before putting that final glue on!


This is what your box should now look like and will later be positioned like this - 


The next stage is decoration and for this you will need a selection of foliage and flowers. These are all from Lisa Horton Crafts.


)

I stuck the larger foliage to the base card prior to attaching the box. Next, I attached smaller foliage and flowers to the slats inside the box and also to the front. To create more height, I stuck a piece of acetate to the back of some flowers and then attached the acetate to the slats.

Once happy with your box of flowers, it can be attached to the base card - I glued the back first, making sure that it was right into the fold of the base card. Once firmly stuck, I glued the side section into place.



To finish, I added one flower to the inside (see first photo), layered a piece of paper with sentiment onto the back and then decided on a happy birthday theme for the front. The card should now fold up, but will be quite bulky, meaning it will most likely need a large postage stamp even though it is only 4x6”. Adding a belly band will help to keep the card closed initially, but I decided that it would not add anything to the project. 

I do hope that you will try this style of card. Whilst my card is a birthday card, this would make an ideal get well card, especially for anyone in hospital who cannot have real flowers.
















Wednesday, 20 July 2022

Wednesday Wonder #48 Circle Stepper card by Gail Mands

Wednesday Wonder #48

 CIRCLE STEPPER CARD


Hello fellow crafters! Welcome to Wednesday Wonder #48 I have a stepper card to show you today but with a bit of a twist - it's a circle! Stepper cards can seem a bit fiddly to begin with but are a great card to put a variety of toppers and embellishments on and I love that the circle cards have a rocking movement too.



I'm starting with a circle measuring 6 1/2" but you can use any size and adjust the 'steps' to suit.  I've used a circle cutter to cut my circle but you could use a large die or, if you have the skills, you can draw round a small plate and cut it out.



Use a pencil to mark at 4" (you can rub it out once you're done)



On your scoreboard turn the circle so the line is horizontal with the short side at the top - to make sure its straight line it up with a ruler. Score it from the top down to the line/ruler at 1 1/2, 2, 3, and 4. You also need to score it at 3 1/4 all the way across the card so best to leave that one until last after you remove your ruler.



(I had to swap my scoreboard as I forgot my Hougie Board doesn't do 1/4")

To make the steps you need to cut from the first score to the last score. I use a craft knife but you might be lucky and be able to use your cutting board!

Now you need to fold your scores - alternating mountain and valley folds and use your bone folder on the creases to make them flat.



Once the card is folded flat you will notice a bit that sticks out but just turn it over and use a scissors to cut it to the shape of the card to make it round again.



Now it's time to decorate the card - If you want to cover the front with paper (as I often do) I find it easier to cut a circle 1/4" smaller than the blank, so in this case 6 1/4" and cut it down to fit the stepper.



You might need to make your own envelope to make sure it fits but depending how you decorate it you might be able to fit it into a 6x6 envelope.



Thanks for stopping by, if you give it a try don't forget to share it on Creative Minds Kind Hearts.

Take Care and happy crafting!

Gail x


Tuesday, 19 July 2022

CAROLINE PATTENDEN WW47 PYRAMID ARROW FOLD CARD

 



Here are my instructions to make a Pyramid Arrow Fold Card.

Credit to Iced Images in YouTube.

A: You will need 2 pieces of card. One 11 1/2 x 5 1/2 inches and second piece 5 1/2 x 2 1/2 inches.
Take the larger piece and score at 5 1/2 and 11 inches, then mark at 2 3/4 and 8 1/4 inches top and bottom (see photo). Next score diagonally (green line) from corner to corner, then score across from 2 3/4 and 8 1/4 inches (blue line). All lines should cross at same point.
The small piece score at 1 and 2 inches.
B: Start to fold scored lines. Pink and green mountain folds and blue valley folds.





C & D: Backing mat needs to be 5 x 5 inches. Mark at 2 1/2 inches on 3 sides then draw lines as in photo. Cut along the lines.
E & F: Patterned mat needs to be 4 1/2 x 4 1/2 inches. Mark at 2 1/4 inches on 3 sides and draw lines as in photo. Cu along the lines.
G: Glue mats together.







H: Start to ease the card into shape.
I: Place tape on narrow edges to main card and smaller piece. Mitre corners to aid a neater fit.
J: Join the 2 pieces together.






K: Add mats to front facing parts of the card.
Please get in touch if this not clear 

Happy crafting 
Love Caroline xx

#weeklypromptfloraandfauna   You will need… Cardstock Tape/glue Patterned paper Complimentary dies/die cuts. Make your card with me … Cut yo...