Tuesday, 19 July 2022
CAROLINE PATTENDEN WW47 PYRAMID ARROW FOLD CARD
Wednesday, 29 June 2022
#46 DOUBLE TAG BOOK FOLD BY ANGELA STINCHCOMBE
WW Summer of Folds No. 46: Double tag book fold
Hello again,
To make this card you will need the following (all measurements are in inches):
Base layer (x1) | 5 ½ x 11 ¼ | Matts (x4)* Patterned paper (x4)* | 5 ¼ x 5 ¼ 5 x 5 |
Front strip (x1) | 2 ½ x 11 ¼ | Matts (x4) Patterned paper (x4) | 2 ½ x 2 ¼ 2 ¼ x 2 |
Pocket (x1) | 5 x 5 Cut in half diagonally | ||
Spine (x1) | 5 ¼ x ¼ | ||
Tags (x2) & ribbon |
*If using the patterned card for cover (as in the example) you will only need 2 matts & 2 patterned paper for the internal faces.
The base & front strip can be cut from a single A4 sheet. I have used Hunkydory Adorable Scorable® “Hedgehog Hugs”. The finished card measures 5 ½ x 5 ½ and fits a standard 6 x 6 envelope, however, it will need to be weighed at the Post Office as it does not fit through the size guide to go as standard mail.
Pattern for sizes & folds
Step 1: Base
Create the base layer by scoring at 5 ½ & 5 ¾ on the long edge (this creates the spine) – both are valley folds. Burnish well. Add matts & paper of choice, including the internal spine.
Step 2: Front strip
Create the front strip by scoring every 2 ¾ on the long edge creating 4 identical areas – fold valley/mountain/valley for concertina effect (see photo above). Burnish well. Add matts & decorate
Matts/decorations in place.
Step 3: Pockets & tags
Add pockets to the base as shown below by only taping the 2 straight edges.
Create tags of an appropriate size to fit the pockets.
Attach the front strip to the base by taping only the 1st and last panels to the base card, ensuring all edges line up (to give you wriggle time add wet glue to your tape before placing).
Step 4: Decorate the front &/or back as appropriate. The finished card should look like the pictures below
front cover
View from above (minus tags)
Angela Stinchcombe
27/05/22
Tuesday, 21 June 2022
Beautiful Fan Fold card WW #45 by Tracy Shephard
Hello everyone.
A lot of you lovely ladies were kind with your comments about my Fan Fold card, so my very first Wednesday Wonder is to show you how I did it.
You will need..
2 x a4 card in contrasting colours. (You can use patterned DSP for the fan if you wish.)
red liner tape
glue
pegs(to hold fan fold while it dries)
a piece of cotton thread.
decorative flower dies
sentiment stamp
1. Mark your a4 card 4 inches on one side. Cut diagonally from the opposite corner to the top of the 4 inch mark.
3. Fold your 'fan' concertina and fold the 'barrel' away from you to the back. you do not want to see the fold from the front of the card.
There will be an extra piece to your fan that will need to be cut away. This is so all the concertina folds are away from the front of the card and looks neat.
4. Next.. using your bone folder or a ruler, carefully shape the card for the 'barrel. It needs to be round so this will help you to bend the card into a circle.
5. Place your fan to the barrel making sure the edges are perfectly aligned.. As I also used collal glue, I held this in place using clips until it dried. Ensure there are no gaps between the fan and the barrel. Again this can be tricky so take your time.
6. Notice on my card, the placement of my sentiment. Your card may be a little top heavy with the decoration and tend to topple over. The placement of your sentiment will help balance your card. I used some foam pads to stick the sentiment to the card.
7. If you wish you can also line the inside of your barrel with pretty design papers to give it a completely different look.
I hope you have a go and make this card. It is a stunning card and I cannot wait to see all your beautiful designs.
Happy crafting x
Wednesday, 8 June 2022
#43 WW Triple Folio Card by Julie Walker
Wednesday, 1 June 2022
#42 WW Triple Easel Card by Angela Stinchcombe
Triple Easel Card by Angela Stinchcombe
Hello everyone. This is my first blog post for Creative Minds Kind Hearts and I have a beautiful card design to share with you.
To make the 3 easels you will need the following (all sizes in inches):
Base layer | Easel panel | Matts (x2) | Patterned paper (x2) | |
Large easel | 11x5.5 Score at 2.75 & 5.5 on the long edge | 5.5x5.5 | 5.25x5.25 | 5x5 |
Medium easel | 9x4.5 Score at 2.25 & 4.5 on the long edge | 4.5x4.5 | 4.25x4.25 | 4x4 |
Small easel | 7x3.5 Score at 1.75 & 3.5 on the long edge | 3.5x3.5 | 3.25x3.25 | 3x3 |
You will also need a raised ‘stop’ for the small easel plus decorations for each easel layer.
Finished size is 5.5x7.5 so fits a standard 6x8.5 inch envelope.
· Fold & burnish all folds as mountains.
· Glue the bottom half of the easel panel to your base layer front section (use wet glue on the folded face only), lining up the front edges carefully
· Glue each matt, then patterned layer in place (1 matt & patterned piece sits on the easel ‘face’, the other on the base) [
· Glue the medium easel onto the largest easel centrally so that the front sits 1” forward – easiest done with the easel open. You may prefer to use red tape here.
· Glue the small easel 1” forward of the medium easel in the same way
· Decorate your layers so that it all folds flat for posting (to fold lay the small easel flat, lay the medium easel over the top, then the large over the medium)
The same instructions can be used for circles or hearts but if die-cutting the shapes remember to place the die over the crease for your base layers to leave a hinge, then cover with the easel panel.
For a different look try placing the square easels off to one side so not so regimented, or use mirror card for matts…….
I would love to see your versions of this Triple Easel card so please share your makes on the Creative Minds Kind Hearts Facebook Group.
Love
Angela
Wednesday, 25 May 2022
#41 WW The Triple Fold Card - by Lisa Shaw
Welcome to Creative Minds Kind Hearts’
41st Wednesday Wonder - the Triple Fold Card
By Lisa Shaw
This week sees what is possibly one of the easiest folds you will ever make, yet it is very effective once finished.
I have used an old Craftwork Cards set of papers called Countryside to decorate this card. The template below should enable you to make this card using basic cutting and measuring tools, with possibly a die or two for the embellishment.
I hope that this will give you the inspiration to make a card in this style.
Love Lisa xx
Tuesday, 22 February 2022
GERALDINE ENTWISTLE Z-FOLD POP UP CARD
HOW TO CREATE A Z -FOLD POP UP CARD
YOU WILL NEED
BASE CARD 8 1/2" BY 5 1/2" SCORE AT 2 1/8" AND 4 1/4" TO CREATE A Z-FOLD CARD
FRONT RECTANGLE PANELS 2 MAT LAYERS - 5 1/4" X 1 7/8"
FRONT TOPPERS 2 MAT LAYERS - 1 3/4" X 1 3/4"
FRONT TOPPERS 2 WHITE CARD PIECES - 1 5/8" X 1 5/8"
MIDDLE AND BACK 2 MAT LAYERS - 2 3/4" X 2 3/4"
MIDDLE AND BACK 2 WHITE CARD PIECES - 2 3/4"X 2 3/4" (CUT 1 PIECE DIAGONALLY)
CORNER PANELS 2 PATTERN PIECES - 2 " X 2" (CUT DIAGONALLY)
2. Stick the four co-ordinating triangles ( 2 COMPLIMENTARY PIECES - 2 " X 2" CUT DIAGONALLY) to the corners of the back of the card. I found that liquid glue makes it easier to align the triangles to the corners.
#weeklypromptfloraandfauna You will need… Cardstock Tape/glue Patterned paper Complimentary dies/die cuts. Make your card with me … Cut yo...
-
Moira Yakova 3D Bow Card This is the card I'd like to share with you for this week's Wednesday Wonder. It's not a card to send...
-
Lisa Shaw made this card in a Facebook Live on Tuesday 1st June. You can view it on our YouTube Channel. https://youtu.be/ObVPb8bMpsg
-
Three Panel Pop out card. Instructions given for a 6 inch card. See end for 5'' inch and 5 x 7'' variations. Take a piece o...


































